Oxyclean Probe Cleaner

Price on Request

exc. GST

The OxyGuard OxyClean is a small attachment which makes a large difference when used for cleaning your OxyGuard dissolved oxygen probes.

Compressed air is used with a blast of air for a few seconds enough to clean deposits from the membrane. This short blast of air is hardly enough to disturb the measurement, and blowers controlled by the oxygen measurement will not normally be affected.

The OxyClean is very easy to use – slip it onto the probe so that it fits onto the top part, just above the join in the probe, then tighten the small grub screw to hold it in place. Connect it to a supply of compressed air controlled by a magnetic valve. A 5 second blast of compressed air at up to 2 bar pressure every 30 minutes should suffice for most uses.

If you use an OxyGuard Atlantic (or a Commander system) you can let a timer in the unit control a standard magnetic valve. If, however, you use the cleaner with an OxyGuard Model 420 a magnetic valve with built-in timer should be used.



Ordering information

  • D091 = Oxyclean attachment.
  • K10TMV = Magnetic valve with timer.

Return to products page
Technolab - Tailored Technology Solutions
+613 6244 1330
Postal address
PO Box 411, Rosny Park,
Tasmania 7018
DELIVERY address
Unit 5/370 Cambridge Road, Mornington,
Tasmania 7018
© TechnoLab 2024 - Site by Gloo