Menu
close
Menu
close
MENU

Oxygen Probe


Price on Request

exc. GST

The OxyGuard probe is a membrane covered galvanic cell that generates an electrical signal proportional to the oxygen pressure it senses, whether it is in water, air, gas, wine, oil or something else.  The probe can be used to measure dissolved oxygen in aquaculture, the environment, in clean water, waste water, in oil or other fluids.


SPECIFICATIONS
  • Dimensions = Diameter 58 mm, length = 59 mm, Cable length = 7 m standard.
  • Weight = 0.2kg without cable, 0.5kg with 7 m cable.
  • Principle = Galvanic cell, self polarizing, self temperature-compensating.
  • Range and Output = 2.5 to 5 minivolts per ppm (mg/l. Output impedance approx. 1 kiloohm.
  • Flow requirements, water = Minimum flow dependent on DO and temperature, typically 1 cm/sec.
  • Operating conditions = 0 to 40C. Submersible to 50 metres.

Return to products page
Technolab - Tailored Technology Solutions
Phone
+613 6244 1330
Postal address
PO Box 411, Rosny Park,
Tasmania 7018
DELIVERY address
Unit 5/370 Cambridge Road, Mornington,
Tasmania 7018
© TechnoLab 2024 - Site by Gloo